Page
Tips
Tips
Start from the flow measurement, that's the easiest one. You can done it the same way as you did the measurement in the previous assignment. But check the type of the Profibus card from the I/O list.
HS-valves
Check the principle from picture 1.
Remove the open and close limits from mgv's parameters (inside the function block).
Control valves
Use the pid function block.
Check from the typehelp to do the interclock.
Pump
Use the ins member for the feedback from the frequency converter.
Profibus IO functions
Check basics from the manual
Figure 1 Shut-off valves
Figure 2 Level switches
Figure 3 From byte to bits
Figure 4 Do the frequency converters's control as shown above
Figure 5 Controlling a control valve
Last modified: Wednesday, 23 September 2020, 10:15 PM